Custom Furniture for closet: A Panel That Hides the TV
Custom Furniture for a closet can include a sliding panel that hides the TV, keeping the bedroom calm and the screen out of sight. The simple win is a room that looks like a bedroom, not a media corner.
Why Custom Furniture Helps Hide the TV
Bedrooms in HDB flats are compact; a 4-room is about 90sqm and a 5-room near 110sqm, so the master often doubles as the lounge. A TV on show makes it hard to switch off at night.
Custom furniture lets a closet front become the cover. The panel slides or folds in line with the wardrobe, so the screen disappears behind a matched finish.
How the panel works
Two common builds:
Sliding panel – runs on a top track, needs 50mm to 80mm of clearance.
Pivot door – hinges at one side, swings flat against the wall.
Leave the TV on a pull-out bracket so it can angle toward the bed when open and tuck back when closed. A powered bracket adds roughly S$150 to S$350. Plan the panel width from the start so the TV and its bracket fit with room to spare; a tight panel is harder to live with than one that's slightly wider.
Materials that stay flat
Use plywood core with laminate for the panel so it matches the closet and resists our humidity. MDF is cheaper but can bow if it's large and the room gets damp. Solid wood looks rich yet moves with the seasons and may gap at the edges.
Vent the back of the cavity so the TV doesn't overheat when closed for long stretches. The 2025-2026 preference locally leans to flush sliding panels with matte finishes that blend into the wardrobe.
Cost, timeline, and the rules
A closet TV panel with a pull-out bracket runs on average S$1.8k to S$4.5k, depending on width and finish. The bracket and track are the small extras.
From measure to install, plan roughly 6 to 10 weeks. That covers measure, 3D drawings, build, and fitting. HDB renovation packages typically include a 1-year defect liability period, so test the slide in the first month. A full HDB renovation in Singapore usually runs S$30k to S$70k, so this panel sits within that broader budget.
Condo MCST rules may require approved plans if the work sits near a common wall or changes the façade-facing side, and some estates limit noisy renovation to weekdays. Check before signing to avoid a stalled job.
Care and resale
Wipe the panel with a damp cloth, vacuum the track, and tighten the bracket screws every few months. Humidity makes timber shift slightly, so a sticky slide is usually a screw or a bit of wax, not a fault.
On resale, a bedroom that hides its TV feels more restful and "finished." You won't recover the full cost, but it leaves a tidy impression.
If the screen dominates your bedroom, a closet panel is a clean fix. Measure the TV, match the wardrobe finish, and let the workshop build the cover as one unit.
