HDB Interior Design Singapore: Pasir Ris TV Feature Wall The Basics

A TV feature wall is the heart of many Pasir Ris living rooms, and HDB interior design Singapore works best when that wall respects the rules, since structural elements like load-bearing walls, beams, and columns cannot be hacked. Recent BTO handovers in the east show owners building clean feature walls with laminate carpentry rather than concrete changes.

Decide the wall's true job

The feature wall does three things at once: it hides the television cables, it stores the items you use often, and it sets the room's style. Write those jobs down before drawing. If you skip this, the wall becomes a row of open shelves that collects dust and shows every cable. A good Pasir Ris plan balances closed cabinets with one open niche for the set-top box.

Measure the television first. A 55-inch set needs a flat panel of about 1.2 metres wide. Build the wall around that, not the other way around, so the screen sits centred with a 10 to 15 cm border of carpentry on each side.

Build with laminate carpentry, not hacking

The feature wall is a built-in, not a structure, so it adds no load. Your HDB Licensed Renovation Contractor frames it in light laminate on a timber stud fixed to the floor and ceiling, not into the concrete. This keeps it inside HDB rules and lets future owners remove it without damage.

For HDB flat space saving, run the cabinets from floor to ceiling. A 4-room flat of about 90 sqm gains several metres of hidden storage that would otherwise need a bulky sideboard. Use push-to-open doors so no handles break the clean face.

Hide the wires the right way

Cables are the part owners regret most. Cut a shallow trunking channel behind the television panel and drop the wires to a console below. The HDB renovation permit lists this as non-structural carpentry, so include it in the filing. Keep the power point inside the cabinet so the wall behind the screen stays bare.

A practical detail: leave a 5 cm gap at the back of the console for airflow. Electronics warm up, and a closed cabinet without air becomes a small oven. Your carpenter should drill a hidden vent near the top.

Choose HDB approved flooring to match

The floor in front of the feature wall should be HDB approved flooring such as vinyl or laminate, laid without a threshold so the eye travels from screen to window. A matte plank in a light tone keeps the wall as the focal point. Avoid glossy tiles there, since they reflect the television and tire the eyes at night.

If you later add an HDB open concept kitchen, the same flooring can run from the living room through the old kitchen line. Plan the plank direction early so the feature wall and the floor read as one continuous design.

Fit the wall into the BTO renovation timeline

The feature wall is built after hacking and before painting. In a BTO renovation timeline, that is usually week 4 to week 6 of the 6 to 10 week works. The carpenter needs the wall flat and the electrical points marked. Drilling for the frame is noisy work allowed only on weekdays 9am to 6pm, none on Sundays or public holidays, so batch it with the other carpentry visits.

Keep the bomb shelter door shut while the feature wall is built. Fine laminate dust drifts and settles in the sealed room if left open, and cleaning it later is a chore you can avoid.

A TV feature wall done well turns a plain living room into a calm, organised space with every wire hidden and every item stored. Start with the screen size, build in light laminate, and hide the cables within the permit. Our whole-house customization team designs the wall as part of the full room, matching the flooring and the lighting so nothing looks added on. Reach out before you collect keys and we will plan a feature wall that fits your Pasir Ris flat and your evening routine exactly.