HDB Interior Design Singapore: Pasir Ris Living Room Explained
HDB interior design Singapore often starts in the living room, and a Pasir Ris resale flat shows why. Many Pasir Ris units were built decades ago, so owners face more hacking and rewiring than a fresh BTO, and the market range for a resale renovation often sits around S$50,000 to S$70,000 versus S$30,000 to S$45,000 for a 4-room BTO. Knowing the shell you inherited decides every later choice.
Read the flat size and existing walls first
A 4-room HDB flat is about 90 sqm and a 5-room about 110 sqm, while a 3-room is roughly 60 to 65 sqm. In an older Pasir Ris living room, the original walls between the living area and the common bedroom may be non-structural partitions, which you can remove. You cannot hack load-bearing walls, beams, columns, or slabs, and the household shelter stays as is with only light fittings and laminated flooring allowed inside. Confirm the wall type with your HDB Licensed Renovation Contractor before any demolition plan goes into the permit.
Use an HDB open concept kitchen to open the sightline
HDB open concept kitchens are allowed, and removing the divider to the living room makes a small Pasir Ris flat feel larger. New BTO kitchens are induction-ready, and a resale can be converted, but gas follows SP Group and SCDF rules, so check the cooktop plan with your contractor. Keep the wet-area floor tiles that HDB provides in the original layout protected during works, and lay HDB approved flooring like vinyl or laminate only in the dry zones to control cost.
Pick carpentry that earns its footprint
Popular space-saving carpentry for the living room includes built-in TV consoles, cantilever tables, and study nooks that fold away. A Pasir Ris living room often has a long but narrow footprint, so a full-wall console with push-to-open doors hides cords and games while a slender cantilever table near the window serves as a dining spot for two. Use laminate carpentry for the carcass and quartz or solid-surface countertops for any surface that meets water.
Step-by-step living room refresh
- Engage an HDB Licensed Renovation Contractor from the Directory of Renovation Contractors.
- Apply for the HDB renovation permit, allowing about 2 weeks for processing.
- Mark structural versus non-structural walls with the contractor on site.
- Choose vinyl or laminate HDB approved flooring for the living and dining zones.
- Install the built-in console and cantilever table as one carpentry run.
- Schedule noisy hacking and drilling on weekdays 9am to 6pm only.
A Pasir Ris living room rewards a clear plan more than a big budget. Our whole-house customization service treats the floor, the carpentry, and the kitchen opening as one decision, so your resale renovation stays inside a sensible market range and the room works for daily life rather than just for photos.
