Friday, 2 October 2026 — Singapore
Renovation Journey / custom writing desk,...

HDB Interior Design Singapore: Pasir Ris Living Room Step By Step

carpentry 20 min read 0 views

HDB interior design Singapore living rooms in Pasir Ris often start as a plain 4-room or 5-room box, then become the heart of the home with the right sequence. A recent HDB trend favours open sightlines from the living room to the kitchen, which suits the induction-ready BTO layouts. The step-by-step build below keeps your HDB renovation permit straightforward.

HDB Interior Design Singapore: Pasir Ris Living Room Step By Step

Step 1: set the living room budget

Decide the share of the renovation that goes to the living room before you touch a wall. Market ranges put a 4-room BTO renovation around S$30,000 to S$45,000 and a resale around S$50,000 to S$70,000 because of more hacking and rewiring. Treat these as market ranges, not fixed quotes, and ring-fence the living room portion.

List the must-haves: flooring, feature wall, TV console, lighting and a storage run. Everything else is optional until the budget confirms it.

Step 2: plan the layout by flat size

A 4-room flat is about 90 sqm and a 5-room about 110 sqm, so the living room usually spans 4m to 5m wide. Place the sofa opposite the TV wall with a 2.4m viewing distance for a 55-inch screen. Keep a 900mm walkway to the kitchen so the open feel holds. Good HDB interior design Singapore starts the living room plan from this walkway, not from the furniture catalogue.

If you want an HDB open concept kitchen, confirm it is allowed. Open-concept kitchens are allowed in HDB, and new BTO kitchens are induction-ready, with gas following SP Group and SCDF rules.

Step 3: flooring and the permit

Use HDB-approved vinyl or laminate flooring across the living room for a clean, uniform look. These materials need no special permission beyond the standard declaration. An HDB renovation permit is required before works begin, and processing takes about 2 weeks, so file the flooring type with the application.

Only HDB Licensed Renovation Contractors in the Directory of Renovation Contractors may do the work. Structural elements such as load-bearing walls, beams, columns and slabs cannot be hacked, so the living room footprint stays as built.

Step 4: build the TV feature wall

A feature wall hides cables and anchors the room. Use laminate carpentry for the console and a laminate or stone-look panel above. Follow these steps:

  1. Mark the TV centre line and set the console at 450mm height for a low, calm profile.
  2. Run power and HDMI points inside the carpentry, not on the surface.
  3. Add a recessed LED strip behind the panel for a soft evening glow.
  4. Keep the wall non-structural so no beam or column is touched.

Step 5: light the room in layers

Fit a ceiling LED panel for base light, a floor lamp by the reading chair, and warm strips under the console. Layer the light so movie nights and work-from-home afternoons both work.

For HDB flat space saving, mount the console to the wall and skip a bulky TV cabinet. The floor reads as open, which is what Pasir Ris owners ask for in newer 5-room flats.

Step 6: storage that disappears

Living rooms collect remotes, toys and cables. A built-in wardrobe or full-height cabinet along one wall stores them behind laminate doors. A pull-out pantry near the kitchen edge holds snacks without a trip back.

Use a platform bed with storage only in bedrooms; in the living room, keep the floor clear and push storage into the carpentry. The bomb shelter stays unused for storage except light fittings and laminated flooring, with the door in place.

Step 7: timing and noise

Noisy works like hacking and drilling are allowed only on weekdays from 9am to 6pm, with none on Sundays or public holidays. Schedule the feature wall and flooring within those hours so neighbours stay happy and the project holds its date.

Your Pasir Ris living room, done right with HDB interior design

A living room built in this order costs less to change later and reads as larger from day one. You protect the structure, pass the permit, and get a space that suits both a quiet morning and a full house on weekend. Smart HDB interior design Singapore keeps that flexibility open instead of locking the room into one look.

If you want the steps turned into a real drawing for your flat, our whole-house customization team can take your floor plan and produce a living room layout that meets every HDB rule while fitting how your family actually lives.

Custom Wardrobes Custom Made Furniture Customize Furniture Design

Related Articles